- Automatic Levels
- GPS Guidance Equipment
- Heavy Equipment Trailers
- Laser Levels
- Levels Surveying Equipment
- Light Equipment and Tools
- Test Equipment
|Product Code:||Anritsu MS2711D Spectrum Master|
The Anritsu MS2711D Spectrum Master.
Covering the 100 kHz to 3.0 GHz frequency range, the MS2711D handheld spectrum analyzer is the proven solution for installing, provisioning, maintaining and troubleshooting wireless systems and RF frequency spectrum interference issues. This portable spectrum analyzer features a built-in standard preamplifier in a compact, handheld design that can go “anywhere, anytime” with no backpack required. Ideal for field environments and applications that require mobility, such as site surveys and on-site system testing. The MS2711D can be ordered with optional built-in transmission measurement that adds scalar analysis capability from 25 MHz to 2.5 GHz.
The MS2711D spectrum analyzer also features several dedicated smart measurements that make testing cellular, DCS/PCS and WLAN systems and other wireless systems easier than ever before. Measurements include received signal strength (RSSI), channel power, adjacent channel power ratio (APCR), and occupied bandwidth measurements that can confirm the distortion level or channel power level of an AMPS, TDMA, CDMA or GSM transmitter. Additionally, the MS2711D can locate and identify out-of-band spurious signals when analyzing a wireless base station transmitter, while the field strength mode allows users to measure propagation and coverage, or to pinpoint electromagnetic (EM) leakage in broadcast systems. Measurement of carrier to interference ratio is included. This measurement is targeted for measurements of 802.11 a, b, and g access points. Other features include trace averaging for more accurate noise measurements; a multilingual user interface with on-screen menus and messaging in 6 different languages; and a 50-ohm interface that is adaptable to 75-ohms, enabling users to conduct measurements of 75-ohm systems without sacrificing measurement accuracy. The High Accuracy Power Meter (Option 19) provides true RMS measurements from 50 MHz to 6 GHz.
Features - of Anritsu MS2711D Spectrum Master.
Handheld, battery-operated design
Built in pre-amplifier (standard)
Lightweight at only 4.9 lbs
Noise Level < -135 dBm typical (preamp on)
Quick Zoom-in, Zoom-out display in 1-2-5 sequence
RBWs: 100 Hz to 1 MHz in 1-3 sequence
VBWs: 3 Hz to 1 MHz in 1-3 sequence
Automatic, manual, and dynamic attenuator control
Amplitude Accuracy +/- 0.5 dB typical
Dedicated smart measurements
Reference Level Offset
Multilingual User Interface (English, Chinese, French, German, Japanese, Spanish)
Store up to 15 measurement test set-ups
Save up to 200 measurement traces
Alphanumeric labeling of saved measurements
Automatic time and date stamp of saved data
6 Markers, limit lines and segmented limit lines
50-ohm Interface standard (75-ohm interface capability - instrument internally corrects for adapter loss)
Built in AM, FM and SSB demodulation
Transmission Measurement, 25 MHz to 2.5 GHz (option 21)
Power Meter (option 29)
Applications - for Anritsu MS2711D Spectrum Master.
Interference detection features include AM/FM/SSB demodulation and interfering signal type determination for cellular signals.
Transmitter Spectrum Analysis - occupied bandwidth, channel power, adjacent channel power ratio (ACPR), modulation and antenna gain/isolation measurements
Received Signal strength (RSSI) - location and identification of in-band interference and out-of-band spurious signals; modulation identification, and spectral masks.
Signal Strength Mapping - to determine the most suitable location for antennas, base stations and repeaters
Stimulus-response measurements - for component test.